DDS Generation 6 Internal USB Tape Drive
Highlights
- Highest capacity and performance in the DDS portfolio
- 3.5-inch or 5.25-inch half-high form factor
- 80GB native capacity (160GB Compressed 1)
- Up to 25GB per hour native transfer rate (50GB per hour compressed 1)
- Investment protection, the 6th generation of proven DDS (DAT) technology
- Read/Write compatible with previous generation DDS Gen5 and DDS-4
- Internal USB interface for simplified plug-and-play installation
- Optional DDS Tape Enablement Kit allows for internal installation in select IBM® System x™ Rack Optimized Servers
- Flexible external USB configuration offerings when used with Desktop, 1U Rackmount, or 4U Rackmount enclosures
- Inexpensive media for lower total cost of ownership
The IBM DDS Generation 6 Internal USB Tape Drive provides optimum capacity, performance, and a low total cost of ownership for small and medium business environments or enterprise workgroups requiring the highest capacity and performance DDS (DAT) drive available.
Highest Capacity and Performing DDS Generation
With up to 160GB 1 of storage per cartridge and speeds of up to 50GB/hour 1 the IBM DDS Gen 6 drive addresses today’s real capacity and performance needs at the same time provides the reliability and backward compatibility that users of the world’s most successful tape technology have come to expect.
Investment Protection
This sixth generation DDS drive provides two-generations of backward compatibility, providing a painless upgrade path. It is capable of reading and writing both DDS Generation 5 (DAT72) and DDS Generation 4 cartridges.
Plug and Play USB Connectivity
The USB 2.0 interface allows for plug and play internal connectivity for simplified out of the box setup. The native USB interface not only delivers a fast and easy installation, but ensures that ports are widely available. It also eliminates the need for an additional host-bus-adapter, which enables a lower-cost implementation.
Time Tested Reliability
Reliability is the first and foremost requirement in any data protection solution and DDS drives have developed a legacy of reliability. DDS uses proven tape media and helical scanning for recording. There are two read heads and two write heads. The read heads verify the data that has been written (recorded) and if errors are present the write heads rewrite the data. Advanced levels of Error Correction Code (ECC) provide further protection for the data on the tape.
